ACCESS DSL MODEM PAGE IN BRIDGE MODE

1
561

bridge

ACCESS DSL MODEM PAGE IN BRIDGE MODE (FROM INTERNET , or local)

As asked by many, here is the short code.

Mikrotik WAN Interface IP = 192.168.2.10
[configure in Mikrotik]

Modem LAN IP Interface IP = 192.168.2.1
[configure in Modem]
[as showed in the image below]

 

First configure IP address in the modem LAN so it can be accessed by Mikrotik.

As showed in the image below …

1- lan


 

Now add rules in Mikrotik NAT section, and move them on TOP

1
2
3
4
/ip firewall nat
add action=masquerade chain=srcnat comment="Masquerade request going to access DSL Panel/zaib" dst-address=192.168.20.10
add action=dst-nat chain=dstnat comment="Route vdsl modem panel request from internet to local modem - dst-port 1234 to port 80 of modem/zaib" dst-port=1234 in-interface=pppoe-out1 protocol=tcp to-addresses=192.168.2.1 to-ports=80

.

Now you can access modem panel from the internet by

http://your_wan_ip_or_host:1234

or from LAN

http://your_modem_local_ip

Note: You can create ACL to restrict access.